These work gloves are designed to withstand the stresses of demolition work and other heavy manual tasks. The palms and fingertips are reinforced with Armortex® material, which increases durability and protects against wear.

The gloves are equipped with Smartswipe™ technology, allowing you to operate touchscreens without taking them off. The interior features a breathable Tri-Knit lining that provides comfort and ventilation during use.

In addition, they offer extra protection over the knuckles, a sweat-absorbing area, and an adjustable Velcro strap that ensures a good fit. The gloves meet the requirements of CE Category 2 as well as standards EN 420 and EN 388 (2221).

The Milwaukee HI-DEX CUT D is a cut-resistant glove made from 18G material, offering a thin and flexible construction with high dexterity. The glove is designed for precision tasks where both protection and mobility are crucial.

The palm is coated with polyurethane, providing a good grip while keeping the weight low. The material is breathable, allowing the glove to be worn comfortably throughout the workday.

Between the thumb and index finger is a nitrile reinforcement that increases durability in an area exposed to frequent wear. The glove is also equipped with SMARTSWIPE™ fingertips, allowing touchscreen operation without removing the gloves.

The product can be washed up to five times without losing its properties, extending its lifespan and reducing waste. The glove is certified according to EN ISO 21420 and EN388:2016 (4X42D) and approved under UKCA, EAC, and Ukrainian standards.

The Guide 5112 work glove in size 8 is made of synthetic leather and designed to provide a good balance between durability and flexibility. The half-lined construction makes the glove comfortable for extended use.

The glove has a curved shape that follows the natural form of the hand and a reinforcement over the knuckles that increases comfort and protects against impacts. The padded palm and half-length cuff contribute to a comfortable and flexible fit.

An elastic band at the wrist ensures that the glove stays securely in place during use. The model has been tested according to standards EN 388 2111X, EN 407 X1XXXX and EN 21420, confirming its level of protection and quality.

The Milwaukee Gloves Cat. 3 were developed to provide effective protection against cuts and sharp objects. The gloves have a level 3 cut resistance, making them suitable for working with materials with sharp edges.

The surface is designed to provide a secure grip, allowing the user to work precisely and steadily even under demanding conditions. The gloves are also equipped with SMARTSWIPE™ technology in the palm and fingertips, allowing touchscreens to be operated without removing the gloves.

This model comes in size XXL/11 and in a pack of 12 pairs, making it suitable for both professionals and companies that need multiple sets for work use.

The Guide 5112 is a semi-lined work glove that provides both protection and comfort for demanding tasks. The glove is made of synthetic leather and offers a good balance between durability and flexibility.

The pre-shaped fit and reinforcement over the knuckles contribute to natural movement and increased durability, while the padded palm provides additional comfort during prolonged use. The wrist is cut semi-short, making it easier to put on and take off.

An elastic band around the wrist ensures that the glove fits securely and firmly during work. The model has been tested according to EN 388 2111X, EN 407 X1XXXX and EN 21420 standards, confirming its protective properties against mechanical and thermal influences.

The Milwaukee Impact-Resistant Safety Gloves Cut E in size 11/XXL are designed to protect hands from cuts and impacts. They are made of an impact-resistant material on the back of the hand and fingers that reduces and absorbs shocks during work.

The gloves feature a reinforced nitrile coating that provides additional protection between the thumb and fingers. The nitrile material ensures excellent grip, even under demanding conditions with oil or high temperatures.

The SMARTSWIPE™ function in the palm and fingertips allows operation of touchscreens without removing the gloves, increasing work efficiency.

The gloves are certified according to European standards for cut resistance, impact protection and heat resistance: EN ISO 21420, EN388:2016 (4343EP) and EN 407 (X1XXX).

The Guide GUIDE 44 work glove is a versatile glove made of goatskin that offers a good balance between durability and flexibility. The material makes the glove suitable for tasks where both protection and dexterity are important.

The back of the hand is made of cotton, which contributes to breathability and comfort during prolonged use. The glove is closed at the wrist with a Velcro fastening, allowing the fit to be adjusted as needed.

The model covers sizes 6 to 13 and has been tested according to standard EN 388 2022X, which specifies resistance to mechanical risks. This makes it suitable for general manual work, assembly, and light industrial tasks.

The Milwaukee HI-DEX CUT C is a cut-resistant glove designed for tasks where precision and safety must go hand in hand. The glove is made from 18G material, offering a thin and flexible construction while ensuring high dexterity during work.

The palm is coated with polyurethane, providing a good grip while maintaining breathability, keeping hands comfortable even during extended use. Between the thumb and index finger is a nitrile reinforcement that increases abrasion resistance in an exposed area.

The fingertips are equipped with SMARTSWIPE™ technology, allowing the operation of touchscreens without removing the gloves. The gloves can be washed up to five times, extending their lifespan and reducing waste.

The product is certified according to EN ISO 21420 and EN388:2016 (3342C) and approved under UKCA, EAC, and Ukrainian standards, confirming its level of protection and quality.

The Guide 2000W is a lined winter glove made of full-grain leather that offers a robust, abrasion-resistant surface while maintaining good flexibility. The glove is fully lined to ensure warmth and comfort when working in cold environments.

The material is made of goatskin, known for its combination of strength and flexibility. The open cuff makes it easy to put on and take off the glove while providing good ventilation around the wrist.

The glove is designed for general manual work and meets the requirements of the EN 388 standard with a rating of 2121X, indicating its resistance to abrasion, cuts, tears, and punctures.

Sizes range from 7 to 12, allowing a suitable fit for different hand sizes.

The Milwaukee Impact Protection Gloves CAT 3 M/8 were developed for users who need effective hand protection when working with tools and materials where there is a risk of impact. The gloves are made from durable materials and feature reinforced areas that protect against impacts and pressure.

Size M/8 fits medium-sized hands and offers a snug yet flexible fit that allows good dexterity during work. The construction is designed for professional use, where both safety and freedom of movement are important.

As part of Milwaukee's safety equipment range, the gloves belong to class CAT 3, indicating a high level of protection against mechanical impacts. They are suitable for craftsmen, fitters, and other professionals working in environments with impact risk or high hand strain.

The Guide 775W is a wind and waterproof work glove designed to protect the hands under demanding conditions. It is made with synthetic leather on the palm, providing a solid and secure grip on tools and materials.

The glove is fully lined, contributing to warmth and comfort, especially when working in cold environments. The combination of a lined interior and waterproof exterior makes it suitable for both outdoor and indoor use where moisture and cold can be a challenge.

The model covers sizes 6 to 13 and meets the requirements of standards EN 388 1121X and EN 511 X2X, documenting its level of protection against mechanical and cold-related impacts.

The Milwaukee Leather Work Gloves M/8 are made from durable leather that provides good protection against mechanical wear while maintaining some flexibility, allowing hands to move freely during work.

The gloves are designed to withstand daily use in demanding environments where grip, durability, and comfort are essential. The leather material ensures a natural fit that adapts to the hand over time.

This model in size M/8 is suitable for users with medium-sized hands and is ideal for a variety of manual tasks, including construction, assembly, and maintenance.

The Guide 1951 is a partially lined work glove made of soft and durable cowhide leather that offers a good balance between flexibility and durability. The glove is designed for heavier work tasks where the hands need to be protected from wear and impact.

The upper side is made of cotton, which contributes to breathability and wearing comfort. The inside is partially lined with cotton, providing a comfortable fit and reducing the risk of skin irritation during prolonged use.

To increase protection, there are additional reinforcements on the fingers and knuckles, and the glove is equipped with a safety cuff that protects the wrist from friction and impacts. The glove meets the requirements of standards EN 388 3143X and EN 407 X2XXXX, confirming its resistance to mechanical and thermal influences.

The Milwaukee IMPACT-RESISTANT CUT 5/E GLOVES - L/9 are designed to protect hands from impacts and sharp objects. The gloves are made of an impact-resistant material on the back of the hand and over the fingers, which reduces and absorbs impacts during work.

The double nitrile coating increases durability and provides an effective barrier against sharp edges and rough surfaces. At the same time, the coating ensures a good grip, even under demanding conditions.

The reinforced nitrile areas provide additional protection and abrasion resistance, making the gloves suitable for use in environments where metal, tools, or heavy materials are handled.

Size L/9 fits most standard-sized hands and provides a good balance between dexterity and protection.

The Guide 8010 is an anti-vibration work glove designed to protect hands from vibrations from machines and hand tools. The glove is part of Guide's Vibro series and combines comfort with functional protection.

The palm is equipped with a 6 mm thick anti-vibration material coated with Guide's premium PU synthetic leather. This construction provides both good cushioning and a secure grip during work.

The back of the hand is made of nylon, which contributes to flexibility and breathability. The glove has been tested according to the EN ISO 10819:2013/A1:2019 standard, confirming its ability to reduce the transmission of vibrations to the hand.

The size 12 model is intended for larger hands and offers a generous fit without compromising mobility or tool feel.

The Milwaukee Winter Gloves Cat. 3 were developed for use in cold working environments where warmth and comfort are essential. The gloves have an insulating lining that helps keep hands warm while also protecting against moisture and water ingress.

The material is designed to provide a good balance between flexibility and protection, allowing the user to remain agile even during prolonged use. The gloves are certified according to EN388, EN511, and EN420 standards, confirming their resistance to mechanical risks, cold, and general protective glove requirements.

This variant is supplied in size 8/M and in a pack of 72 pieces, making it suitable for companies or workplaces that require large quantities of protective gloves.

The Guide 5112 is a semi-lined work glove made of synthetic leather that provides both protection and freedom of movement at work. The padded palm adds comfort, while the material ensures a good balance between durability and flexibility.

The glove has a curved shape that follows the natural shape of the hand and reinforcement over the knuckles, which increases durability in the most stressed areas. The short cuff and elastic around the wrist ensure that the glove fits snugly and securely on the hand.

The model has been tested according to standards EN 388 2111X, EN 407 X1XXXX and EN 21420, which document its level of protection against mechanical and thermal influences. It is suitable for many types of manual and assembly work where both precision and comfort are important.

The Milwaukee Impact-Resistant Safety Gloves Cut E 10/XL are designed to protect hands from impacts and sharp objects. They are made of an impact-resistant material on the back of the hand and fingers that reduces and absorbs shocks during work.

The gloves feature a reinforced nitrile coating that provides additional protection between the thumb and fingers. The nitrile material ensures a firm grip, even under challenging conditions such as oil or extreme temperatures.

The SMARTSWIPE™ technology in the palm and fingertips allows the operation of touchscreens without removing the gloves, increasing work efficiency.

The gloves are certified according to European standards for cut resistance, impact, and heat protection, including EN ISO 21420, EN388:2016 (4343EP), and EN 407 (X1XXX).

The Milwaukee HI-DEX CUT D is a cut-resistant glove designed for tasks that require both protection and precision. The glove is made from 18-gauge material, offering a thin and flexible construction while maintaining good finger dexterity.

The palm is coated with polyurethane, providing a secure grip while ensuring a light and breathable feel. Between the thumb and index finger, there is a nitrile reinforcement that increases durability in an exposed area.

The glove is equipped with SMARTSWIPE™ fingertips, allowing the operation of touchscreens without removing the gloves. It can be washed up to five times, extending its lifespan and reducing waste.

The product is certified according to European standards for cut resistance, including EN ISO 21420 and EN388:2016 (4X42D), as well as UKCA, EAC, and Ukrainian standards.

The Milwaukee Gloves Cat. 5 were designed to protect hands from injuries caused by sharp objects and materials. The gloves are certified according to European standards for cut resistance level 5 and provide a high level of safety when handling metal, glass, or other sharp surfaces.

The grip zones are equipped with a double layer of material, which improves grip and ensures stable handling even under changing temperatures or oily surfaces. This construction makes the gloves ideal for demanding work environments where precision and control are required.

The gloves also feature SMARTSWIPE™ technology in the palm and fingertips, allowing touchscreens to be operated without removing the gloves. The specially woven material provides both high fingertip sensitivity and wearing comfort.

The model in size XXL/11 is supplied in a pack of 12 pairs, making it suitable for both individual users and companies that need multiple sets in the workplace.